Contact Us

HDMI over CAT5 Extender w/Built-in 2X1 HDMI Switcher

Item Code: HDTVSE1SE2
Please enter a quantity.
This 2X1 HDMI to CAT5 Extender Switcher set extends 2 HDMI devices up to 100 feet using only one CAT5 cable. Its integral 2X1 HDMI manual switcher allows you to select either of the two HDMI inputs to be sent to one RJ45 output.

The 2X1 HDMI Switch to 1-CAT5 Extender Set can be used to manually switch between a cable/sat box and a DVD player and sent >100 feet to a remote widescreen over just one CAT5/6 cable. The HDMI to CAT5 system consists of a transmitter unit and a receiver unit. At the source end, the high-speed transmitter transcodes HDMI signals over 1-CAT5 cable. At the display end, the externally powered receiver unit transcodes signals back to HDMI.

NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 833-WOLFPACK (833-965-3722) right now to discuss your needs.

2X1 HDMI to CAT5 Extender Switch Features:

  • Built in manual 2X1 HDMI switcher
  • Use only one CAT5/6 cable
  • Can be used with 480i, 480p, 720p, 1080i, 1080p resolutions up to 100 feet
  • HDMI 1.3, HDCP 1.1 and DVI1.1 Compliant.
  • Equalizes and recovers incoming TMDS data before re-transmitting it in
  • Optimal quality regardless of the incoming signal quality.
  • When transmitting a signal in 1080p resolution the CAT5E/CAT6 operating distance is ~50 meters with CAT6.
  • Supports XVYCC
  • Video Bandwidth: 1.65 Ghz
  • Connectors: Standard HDMI 19pin, RJ45 (CAT5E)
  • HDCP Compliant
  • 2-Power Supplys: 5v 2a DC on both the send and receive units
  • Includes one transmitter, one receiver and two AC power adapters
  • Size: 66mm x 67mm x 24mm

Why not buy this 2X1 HDMI to CAT5 Switcher Extender today?