Contact Us

HDMI Booster w/Power Supply - Built-in Equalizer for Better Picture - BEST

Item Code: HDTVHRP0101M
Please enter a quantity.
This HDMI Booster extends the length of an HDMI cable up to 131 feet by regenerating the HDMI signal before it sends the outputs to the HDMI monitor or projector. The HDMI booster goes at the TV end of the cable and comes with an AC adapter to supply additional power to get a picture with a longer HDMI cable. This HDMI Booster has an iron shell for better EMI elimination and it will clean out the digital noise (sparkles) in your picture. With the unique designed design, this HDMI Booster can be attached to a structure with the supplied "L" bracket.

HDMI Booster Features:

  1. 2D and 3D compatible
  2. Supports HDCP
  3. Supports the highest video resolution of 1080p
  4. Supports both HDMI video and HDMI audio
  5. Auto-EDID
  6. Supports 1080p TV's at 24/30/60/100/200/240 Hz and above as well as Blu-rays at 24 FPS
  7. Supports 225MHz/2.25Gbps per channel (6.75Gbps all channel) bandwidth.
  8. Supports 12 bit per channel (36 bit all channel) deep color.
  9. An AC adapter is provided
  10. HDCP pass-through.
  11. Iron Shell for better EMI elimination.
  12. Supports uncompressed audio such as LPCM.
  13. Supports compressed audio such as DTS Digital, Dolby Digital(including DTS-HD and Dolby True HD).
  14. 8 levels of equalization settable by turning the equalizer switch from 0 to 7 so to support different lengths of an HDMI cable between 3 foot to 113 feet.
  15. Unique designed metal structure for better connection.
  16. Optional HDMI cable (see above).
NOTE: 24AWG or thicker (lower AWG number) similar to our HDMI cables are HIGHLY RECOMMENDED for best performance with this HDMI Booseter. Some devices will require thicker gauge, category 2 cables to work with this HDMI Booster.

The HDMI Booster has an adjustment on a special designed equalizer that can be adjusted to give the best picture quality on a long HDMI cable. For best results adjust the EQ from 0 to 7, according to the different length of HDMI cable. It also comes with an AC adapter to provide additional voltage and current to drive a long HDMI cable.

NOTE: These HDMI boosters works only at the end, or near the HDTV, not at the source device. The HDMI booster is placed near the display to remove any noise that has been generated by a long HDMI cable. Connect the output of the source device into the input of HDMI Repeater and connect the output to the HDMI display unit. The HDMI Repeater is put close to the HDMI display unit (Input cables are optional)

According to the length of HDMI cable the special designed EQ can be adjusted to reach the best transmission function. This HDMI Booster adopts the iron shell for better EMI elimination and it will clean out the digital noise (sparkles) in your picture.

Why not buy this HDMI Booster today?