Menu
Contact Us

4K WolfPack 5x1 HDMI 2.0 HDCP 2.2 60Hz Auto-Sense Switcher

Item Code: HDTVAWHSW0501C
$249.95
$199.95
Please enter a quantity.
HDTV Supply′s WolfPack 4K 5X1 HDMI Switcher with Auto-sensing switches 5 HDMI inputs to one HDMI output. Auto sensing inputs allow auto-switching between only active HDMI sources. This intelligent HDMI 5X1 Amplifier Switcher allows up to five HDMI source devices to be switched into one HD monitor or projector. Specially adopted “touch-button” design greatly eases input selection and provides improved reliability. Another benefit is the location of one input on the front panel of the device. This not only reduces the products size, but also greatly eases use with temporary or portable input source devices.

The 5X1 HDMI Switcher switches between units as you turn them on, so you rarely have to reach for the remote for the unit other than to turn it on and off. Auto sensing prioritize #1,#2,,,#5, with a further override for last device turned on.

How the 5X1 HDMI Switcher with Auto-sensing works:

  1. Once a source device is turned on (or plugged while turned on) the switcher automatically selects that source.
  2. Once that source device is turned off or un-plugged, the switcher automatically selects the next powered-on source in the sequence (input1 > input2 > input3 > input4 > input 5 > input 1 etc.>)
  3. To select manually, simply use the “touch-button” to advance to the next input in the sequence (input1 > input2 > input3 > input4 > input5). The switcher will automatically skip source inputs that are not connected, or sources that are not powered

5X1 HDMI Switcher with Auto-sensing Features:

  • Five HDCP compliant HDMI 2.0 and one HDCP compliant HDMI 2.0 output
  • Switching is done via automatically when signal a is present on one of the ports.
  • Supports HDCP 2.2 protocol
  • Support high resolutions: 480i/p,576p,720i/p,1080i/p,3840x2160@60Hz
  • Extend the transmission distance and improve transmission signal.
  • Compatible with DVI by using HDMI TO DVI adapter.
  • Plug-and-play.
  • Convenient to connect multi-group input signals to display on one HDTV.
  • Save space. Allow several sources to use one high definition display device simultaneously.
  • Metal casing design and overall shielding without signal interference.
  • LED indicates signal and power mode.
  • Xbox360 Elite, PS3, HD DVD, Blu-ray, upconverting DVD player and cable / satellite receiver compatible.
  • Easy switching of multiple HDMI sources (e.g. DVD, cable/satellite receivers) using the included remote control or the switch on the front panel
  • Can be used to switch DVI (no audio) if an above adapter is used
  • Supports 480i, 480p, 720i, 720p, 1080i, 1080p and 1440p and PC resolutions to 1920 x 1200 resolutions
  • VGA video formats supported up to VGA 920 x 1200 Video amplifier bandwidth: 2.5 Gbps/250 MHz
  • Maintains highest HDMI single link video resolution
  • Supports DDWG standard for HDMI compliant monitors
  • HDCP Compliant
  • Low cost solution for home theater integration
  • Plug-and-play. No software installation
  • Installs in seconds
  • To use a DVI device use one of our above DVI to HDMI cables or adapters to connect a DVI device to a HDMI input or output
  • Video amplifier bandwidth: 2.5 Gbps/250 MHz
  • Power consumption: 20W (max)
  • External power supply included: 2 Amp 5V DC for 110V source
Multi-channel digital audio and high definition video are fed to the display by each source (shown below), when selected. Users have the option of switching sources using front panel buttons or the IR remote that comes with the unit. This HDMI switcher is compatible with HDTV′s with a 120 Hz frame rate and above and Blu-ray, HD-DVD DVD players etc. with a 24 Hz frame rate.

NOTE: The operation of the Intelligent Function will be impacted by the source devices operation in standby mode. If power is still applied to the HDMI output when the source is in standby mode, the switcher will treat this source as if it is “on”. A few devices like some DVR′s, cable and satellite receivers are "always ON" so auto-sensing switchers, like these, need the "always On" devices, to be at a lower video input so it doesn′t block other switcher devices. If you have 2 devices that are always ON you′ll need to use the buttons and / or remote control ( if they have them ) to switch inputs. An Apple TV keeps its HDMI port active even in the sleep state so auto-switching may not work with the Apple TV. Manual switching can still be used.

Why not buy this 5X1 HDMI Switcher with Auto-sensing today?