Contact Us

6 Foot 3 BNC to 3 RCA Component Video Cable - 1080p Rated

Item Code: ts2547XXIV
Please enter a quantity.
These 3 BNC to RCA component video cables feature the highest possible signal strength & maximum frequency response. Ultra-wide bandwidth capabilities, out to 1GHz, allow high definition standards of 1080p, and above, to be met. This High Quality component video conversion cable is used for displays that require a BNC connection from a PAL / NTSC video source. Features RCA Component Video Male Plugs on one end and BNC Component Video Plugs on the other. Color: Beige.


  • End 1: RCA Component Video Male Plugs
  • End 2: BNC Component Video Plugs
  • Color: Beige
  • Shield Type: foil+braid+spiral
  • Weight: 1 lb
  • This component video cable is tested to 480i / 480p / 720p / 1080i and 1080p (1920 x 1080 @60Hz) to assure you of the best picture available today with ANY cable
  • HD DVD and Blu-ray DVD player compatible
  • Xbox and PS4 compatible with component video output
  • 24 Kt gold plated connectors
  • Superb build quality to look good in your home theater
  • Very accurate 75 ohm impedance to eliminate fine detail robbing standing waves
NOTE: if you are trying to connect a set top box, DVD player, etc to an older HDTV that has 5, repeat 5, BNC connectors this cable will not work as you need those additional 2 (horizontal & vertical sync signals) connectors also.

If you have a VGA input on your TV see our RCA to VGA breakout cable. Make sure the TV's VGA input resolution is similar to or identical to your set top box or you may not get a picture. This RCA to BNC component video cable offers precision-machined 75-ohm BNC and RCA connectors featuring corrosion-resistant 24K gold contacts that ensure high conductivity for the best possible picture, and support the ultra-high resolution standards your high definition components use.

The BNC to RCA component video cable will not only support the fast 1080p signal but of course will support todays resolutions of 480i / 480p / 720p and 1080i so you can use them today. This 3 BNC Male to 3 RCA Male component video cable is made for high definition systems. They fully support component (Y, Cr, Cb) connections and have >10 tests performed on them before shipment to assure the pass a 148.5 Mhz (1080p - 1920 x 1080 @60Hz) high definition signal without any impact. The test data comes along with the RCA to BNC component video cable. Each individual wire of the BNC to RCA component video cable has been tested and if the BNC to RCA component video cable passes a high definition 1080p sweep test signal perfectly otherwise the 3 wire BNC to RCA cable is discarded.

Why not buy one of these BNC to RCA component video cable today ?